Women's Tips

How to clean fur products at home

Pin
Send
Share
Send
Send


Products from fur, as well as any other subjects of clothes, periodically need to be put in order. Of course, not everyone knows how to clean the fur at home. Most often we ask for help from specialists. You can clean the fur products in special establishments, such as dry cleaning. But at the present time, dry cleaning services are quite expensive and not everyone can afford them, and it is also unknown how they will handle your things in such establishments. In order to be sure that everything is in order with winter things, there is nothing better than cleaning the fur at home.

But for this, of course, it is necessary to learn a few practical tips to bring outerwear in order. For example, the cleaning of faux fur is conventionally divided into three types: cleaning of fur hats, collars and outerwear (fur coats and coats). And each type of product requires special care. But there are universal tips that are suitable for any of them:

  • It is necessary to prepare a mixture of vinegar, water and alcohol in the ratio of 1: 1: 1, and then with a brush to gently apply it to the fur in the direction of growth of the villi. After that, the mixture must be wet with a clean cloth.
  • Heat wheat or rye bran, then apply them to the fabric. After that, carefully brush them off. Then you need to shake and smooth the fur product.
  • To get rid of greasy stains on the things of their fur and down, it is best to use gasoline. It should be applied in a thin layer along the growth of the long fur lint and against the growth of the short fur lint.
  • How to clean the fur at home without using gasoline? You can make a mixture of ammonia and salt in the ratio of 1: 3 (you can measure with a teaspoon). Then add the mixture to ½ liter of water. It is necessary to process the fur with the resulting solution. After that, wipe with a wet rag.
  • There is nothing easier than to clean the fur at home, using ordinary shampoo for hair: one tablespoon is diluted with a liter of water. The resulting solution and you need to clean the fur product, but very carefully, so as not to wet the core, otherwise you can spoil the fur thing.
  • If the fur is stained with any stains, you can use medical and ammonia to clean it in an equal ratio. After applying the solution on the fur, you must wipe it with a wet cloth and dry thoroughly.
  • A mixture of ammonia, salt and pure water in the ratio of 1: 3: 50 perfectly helps to get rid of stains of various kinds. After treating the fur with a similar solution, the product is wiped with a clean, damp cloth, carefully dried and combed.
  • If the fur is not soiled with stains, but just dusted, you need to cover it with a wet rag and knock it out. The same method can be used if you do not know how to wash a fur collar.
  • To give the fur a glossy shine, you need to wipe it with a rag previously moistened with acetic extract. The same effect can be achieved if you periodically moisten the fur product with glycerin.
  • It is easy enough for the dumped fur to return the original condition and appearance. It is only necessary to wipe the fur with alcohol, smooth, and later comb the growth of villi.

During the cleaning of fur it is necessary to remember to remember the safety rules when working with toxic and strongly smelling substances, such as gasoline, ammonia and acetic acid. All work should be carried out only in a well-ventilated area, away from heating appliances and flammable materials. It is also forbidden to smoke during the cleaning of fur products and to be near a smoking person, because fur is a combustible material that ignites from the slightest spark in a fraction of a second.

Following these rules and tips, you will be not only satisfied with the results of the work, but also save money.

The content of the article

  • How to clean fur products at home
  • How to shine fur
  • How to clean your coat yourself

Before you start cleaning the fur, you need to make sure that the fur is really dirty. You can find out with the help of a regular hair dryer, sending a stream of cold air to the fur. If the villi of the fur is lifted easily and freely, it means that it is clean. If the fur under the influence of air does not swell, then this indicates that a lot of dirt and dust has accumulated on it and the fur product needs cleaning.

In ancient times, for the cleaning of fur products used crushed bran and sawdust. This method is relevant in our days, especially since it is absolutely safe and environmentally friendly. Spread the fur product on a flat surface, evenly scatter sawdust or bran, and then begin to vigorously rub the fur with a brush. When the fur glistens, just gently shake the sawdust with your hand.

How to clean light fur

Light fur has a tendency to turn yellow over time, losing its attractiveness, so it should be cleaned more often. There are several effective ways to clean a white fur coat or other light fur product. One of such methods can be attributed to the cleaning of fur using semolina, wheat or starch flour. For best results, it is recommended to pre-heat the grits or flour in the pan to 80 degrees. The main thing is that the ingredients necessary for cleaning do not burn, otherwise there may be dark spots on the white fur.

You can return the original look to the yellowed fur by simply wiping it with 5% hydrogen peroxide solution. If it was not possible to remove the yellowness from the first time, then the procedure should be repeated several times.

To clean the white fur at home, you can use another effective means. For its preparation it is necessary to mix the corn or potato starch with gasoline to a uniform consistency. This method is excellent for cleaning certain heavily soiled areas (for example, grease stains, greasy collar, etc.). Apply the prepared mixture to the contaminated area, gently rub it, then remove the mush from the fur with a brush. To get rid of the peculiar smell of gasoline, hang out a fur coat on the balcony for a while.

How to clean other fur products

Update the old fur will help emulsion, prepared from potato peelings. To do this, they must be crushed in a blender or minced, then add a small amount of liquid ammonia to the cleanings. Apply the obtained product on the fur product and rub it well with a brush, then carefully remove the mixture and comb the fur.

You can clean the fur with a long pile (for example, fox fur or fox fur) using ordinary table salt. To do this, place the product on a horizontal surface, sprinkle it with fine salt and rub the fur with a brush. If a fur coat or hat has severe contamination, then use saline solution - for its manufacture 3 tsp salt and 1 tsp of ammonia must be diluted with a liter of water. In the prepared solution, moisten the brush and gently clean the fur product with it.

Remove the fat spot from the fur will help the solution of salt and ammonia, prepared at home. To do this, dissolve 1 tsp of alcohol and 1.5 tbsp in half a liter of water. tablespoons of salt. Wipe the contaminated area with a brush pre-moistened with saline.

If the product is made of artificial fur, then it is much easier to clean it - just wipe the fur with gruel made from detergent and water.

How to return the fur shine

The easiest way to restore shine to a fur item is to comb it with a metal comb with fine teeth. If you do not have a metal comb, then you can use another method - wipe the fur with a sponge dipped in a solution of table vinegar and alcohol.

Vinegar essence will help to give a fur coat lasting and beautiful shine. Dampen a sponge or cloth in it and wipe its fur over the pile. Since the acetic essence is very caustic, the cleaning procedure must be carried out with protective gloves.

You can make the fur shiny with the help of an ordinary walnut. To do this, chop the nuts in a blender or blender, wrap them in a gauze bandage and wipe the fur. After peanut oil is absorbed into the structure of the fur, it will become smooth and shiny.

Arctic fox and silver fox

Fur coats or vests of arctic fox and silver fox can be easily cleaned at home, if, of course, stock up on any of the means described.

Method 1 - ammonia

  1. Mix ammonia (1 tsp) with the same amount of gel.
  2. Pour in 0.5 liters of warm water.
  3. Dip a sponge into this tool and gently grease the nap.
  4. Palms distribute the composition of the coat on the surface.
  5. Rinse with clean water, squeezing the sponge well.
  6. Walk on the fur with a dry napkin.

Method 2 - hair shampoo

To clean your fox fur well, use your shampoo. An alternative to it will be a pet shampoo, a means for washing wool and silk, or pure gasoline.

  1. Take any of these tools.
  2. Add a little water (the solution should be weak).
  3. Moisten a cotton wool or rag in the prepared solution and "comb" fox fur. You can take a spray and handle a fur coat from the spray.
  4. Wipe the nap with a clean paper towel or terry towel.

Chinchilla, muskrat, otter

The animals themselves are cleaning themselves with sand. So why shouldn't we apply this method with you?

  1. Spread the product on a flat surface.
  2. Preheat clean sand to maximum temperature.
  3. Sprinkle it with polluted areas.
  4. Shake off the dirty sand.
  5. Repeat if necessary.

To clean the mink fur, you can safely apply the following recipes.

Method 1 - Vinegar and Alcohol

  1. Mix table vinegar, water and alcohol, taken in equal proportions.
  2. Dampen a sponge or brush and walk it over the fur.
  3. Wipe dry with a clean cloth.

Method 2 - ammonia, gasoline, water

  1. Connect 3 tbsp. l salt, 0.5 liters of water and 1 tbsp. l ammonia.
  2. Swab the clouded parts.

Rabbit, goat, nutria and wolf

Rabbit fur is just perfect for any cleaning. To return a presentable look, choose any of these recipes.

Method 1 - Alcohol and Vinegar

  1. Mix equal parts of water, vinegar and pure alcohol.
  2. Dampen a sponge in this mixture and go through the whole fur coat.
  3. Dry with a clean cloth.

Method 2 - bran (suitable for cleaning white rabbit)

  1. Heat the bran in the microwave.
  2. Sprinkle them with fur.
  3. Remember the villus with your hands.
  4. Allow bran to cool.
  5. Brush the rest of them with a brush.

Method 3 - Dust Out

  1. Place the rabbit piece on a clean, wet sheet.
  2. Knock it out with a beat - the dirt will remain on the fabric.

How to clean white fur?

How to clean white fur from yellowness? Be very careful not to spoil the nap and natural shade. First try the tool on an inconspicuous area, and then proceed to cleaning the surface of the fur coat. Good effect give:

  • Sawdust hard wood, soaked in gasoline. They need to squeeze out of gasoline, scatter on the light fur and rub it with your hands,
  • Soda + medical alcohol (1: 3). Dampen a sponge in this mixture and walk along the fur coat in the direction of the pile growth,
  • Aqueous solution of zoo shampoo (weak). The solution is also applied with a sponge, and then wipe the pile with a dry paper towel,
  • Flour, semolina, starch, talc. Distribute any of these products to the fur. Make a choice in favor of talc - it is not interesting for moths. Carefully remember the pile hands to pick up all the dirt and dust. Repeat until cleaning agent stops changing color. Shake the coat well to remove any residue, or take a vacuum cleaner turned on at low power. For deep cleaning of fur, the product can be heated
  • Peroxide and ammonia. Mix ammonia (3 drops) with hydrogen peroxide (1 tablespoon), add a glass of water. Pour the mixture into a spray bottle or apply to the fur with a clean sponge.

Be sure to hang the fur in a well-ventilated area so that it is completely dry.

Important! If you have spilled wine, juice, sauce, coffee, tea on a fur coat, vest or a fur coat, carry it in a dry-cleaner! Do not risk with a home remedy, so as not to spoil the fur.

Faux fur

Modern faux fur perform so beautifully that it can not be distinguished from natural products. Under the "fox", "raccoon", "mink" - the cost of such products will be much cheaper. But this does not mean at all that no care is needed for the artificial fur! Remember a couple of recipes that will help you clean it from dirt.

Method 1 - glycerin, alcohol and water

  1. Combine glycerin (10 g) with water and pure alcohol (0.5 l each).
  2. Walk along the fur with a cloth dipped in this solution.
  3. Remove excess moisture with a dry cloth.

Method 2 - Starch and Dishwashing Liquid

  1. Fill the starch with dishwashing gel.
  2. Apply gruel to faux fur and distribute with a brush.
  3. Wash off the residue with a clean sponge dipped in warm water. You can also leave the tool to dry completely, and then just shake off or clean with a brush.

Method 3 - machine wash

Non-natural coat can be washed in a typewriter on a delicate mode. Spin can not be used! Faux fur dries long, so hang the product on the balcony or in a room with open windows. Ensure that no direct rays of the sun fall on it. However, this also applies to natural fur. The sun will make the nap brittle. It will also lose its shine and may turn slightly yellow.

Method 4 - gasoline from grease stains

Stoned pockets, sleeves or fur collar wipe with a cotton swab dipped in clean gasoline. An alternative to it will be a liquid for cleaning carpets and furniture upholstery. In this case, follow the instructions on the package.

Important! Rinse off with water or a wet cloth!

Method 5 - powder and water

This is the safest and easiest way to clean faux fur!

  1. Prepare a soap solution by mixing washing powder (1 tbsp., Should not contain bleaching agents) and 1 liter of water.
  2. Cool this liquid and apply on the fur with a cotton swab or regular washcloth.
  3. At the end of the process, wash off the foam with a clean cloth dampened with warm water.

Some more tips

Now you know exactly how and what to clean the fur at home. But do not forget about the nuances, because they are very important!

  • Do not dry the fur product, hanging it on the battery, ironing it or blowing a hair dryer,
  • For natural fur washing - under strict prohibition. Mezdra should not get wet!
  • Vinegar is not recommended for faux fur,
  • Do not use for cleaning sawdust of coniferous trees - they contain tar,
  • Do not brush your astrakhan fur, just shake it well,
  • If the fur has lost its shine, wet the cotton in glycerin or vinegar and walk it over the pile. Top with alcohol and comb the fur with a comb. Do not repeat very often - vinegar makes the fur tough,
  • To the base of the fur collar does not get hardened with time, regularly treat it with a glycerin solution (1 part water and glycerin).

Video: bio-fur cleaning:

How to clean the fur at home: from dust and dirt

You can check the degree of contamination of the fur by sending an air stream from a hairdryer to it. If the villi easily fly away in the direction of the air, and then return to the place, shine, then dust does not accumulate in the fur coat, and it does not need to be cleaned. When the villi stick together, are greasy and look inaccurate, then the product needs help.

Dust is easily removed if you wrap the fur coat with a clean damp sheet or with any cotton cloth and knock it out intensively. It is more convenient to emboss, spreading the sheet on the floor, putting the product on it pile down.

Small things, such as hats and detachable collars, cuffs are easily cleaned by the action of steam. To do this, you can use special steam cleaners or steam jet from the iron, then the fur should be dried.

Not bad cleans dirt, gives a well-groomed appearance and shine lemon juice, diluted in equal quantities with water. With a sponge dipped in a solution and well wrung out, the fur is wiped, after which it is dried and combed with a comb.

We clean a white fur coat

To remove the dirt, you will need semolina, chalk, talc, baby powder or potato starch, which are sprinkled with fur generously. The porous structure of the materials will absorb soiling, the substances will polish the hairs and give them extra shine. To clean the fur of a rabbit or a hare, you can use rye or oatmeal flour.

With gentle movements, the croup is rubbed into the pile, after which the coat should be thoroughly shaken. The starch remains are brushed first in the direction of wool growth, and then against. The starch gray is a sure sign that the fur coat was really dirty. Если мех очень грязный, манипуляцию следует повторить два или три раза, пока крахмал не будет высыпаться белым.

Вернуть изделию ослепительную белизну поможет чайная ложка перекиси водорода, разведенная в стакане воды с добавлением нескольких капель нашатыря. This means you need to spray the fur from the spray gun and hang it to dry in the sun, but no more than one day.

Dark Fur Products

Here will help water, alcohol and vinegar, mixed in equal amounts. Apply the mortar with a soft nap brush or a terry towel. For better effect, you can wipe the pile several times, and then dry the coat in the open air.

And you can use the absorbing properties of rye or wheat bran, previously dried in the oven, or small sifted sawdust. Sawdust coniferous trees contain resin, so they can not be used. Wood cat litter is perfect. Absorbent along with the nap should be gently rubbed with your hands, imitating hand washing, trying not to damage the hairs and not mash them.

It is undesirable to use a vacuum cleaner to remove bran or sawdust; it can damage the fur, it is better to shake out the product intensively.

You can use hot, dry sand to clean things from coarser fur, such as an otter, nutria, or a mole. This will remove contamination from the undercoat, which is particularly thick in these animals.

How to clean the fur at home if it is salted

To get rid of fur from greasy stains, traces of sweat or greasy look, you will need gasoline. Moistened sponge in it is necessary to wipe contaminated sites. Fresh stains are easily removed with a nap, and old stains are also in the opposite direction. In this case, a liter of gas will not prevent the dissolving of a teaspoon of laundry detergent, which will double the effect and clean the fur even from very old stains of fat.

For combing the pile in gasoline, you can moisten a brush, instead of a sponge.

This method is equally good for both products from long and thick fur, and suede or nubuck.

It is important not to neglect security measures. Cleaning should be carried out in a well-ventilated area and away from sources of open fire.

Light or white fur may turn yellow from gasoline. To clean it from grease and grease, it is better to use table salt with ammonia, mixing them in a ratio of 1 to 3. Also any suitable detergent for wool or shampoo for bathing pets to get rid of dirt . The tool must be thoroughly whipped in warm water to form a thick foam, which and handle the product. Foam should always be washed off, after waiting a few minutes, rubbing the fur with a sponge dipped in clean water.

It is important not to allow the skin to get wet, to carefully squeeze out the sponge, moving only along the surface of the nap with smooth movements.

Beautiful shine will return ordinary vinegar. But after processing, it is better to hang the coat in the air, so that the smell will disappear.

How to clean the fur at home: from paint and ink

If there was such a nuisance as stains from paint or ink, then it does not matter. In this case, gasoline mixed with starch to the state of liquid sour cream will also help. The product must be applied to the stain and wait until it is completely dry. Then brush the fur over the pile with a brush.

Oil paint is easy to remove with sunflower oil. To do this, moisten a cotton swab or disc in oil and wipe the stain on it and against the nap.

Unfortunately, it is much harder and sometimes impossible to remove old paint or ink stains without chemicals. Small stains can be wiped with acetone, solvent, turpentine or a special tool "White spirit." After that, be sure to clean the area with water with the addition of baking soda, wipe with a dry towel and dry.

If nothing helps, then it is better to pass the product in dry cleaning.

How to clean the fur at home: from the sauce and ketchup

Quite often, it is necessary to have a snack on the go, and during a meal, small accidents are not excluded, when sauce or ketchup is spilled on the fur collar or cuffs. Of course, it would be good to immediately wipe the stains with a damp cloth, but what to do when the dirt is already dry?

To get rid of them, you need to mix in equal proportions of water, vinegar and shampoo for cats or liquid for cleaning carpets and wool. Apply the solution directly to the stain and leave for a while, trying not to wet the undercoat. Then wipe with a damp cloth and dry.

Glycerin can also be applied to the stain, and after a few minutes, wipe the fur with a sponge dipped in warm water.

How to clean the fur at home and not to spoil it

It is important not to spoil an expensive and beautiful thing with improper actions, therefore during home cleaning some rules should be followed:

1. The product should be conveniently placed on a flat surface before cleaning, preferably on the floor.

2. Before you put any tool on the fur, you should try it on an inconspicuous area (for example, under your arms), so as not to damage the expensive thing.

3. In no case can not completely wet the fur, and especially the core. The product can be deformed, twisted, become more rough and even burst.

4. It is forbidden to rub too much fur so as not to damage the base and not to spoil the villi.

5. After any treatment, the fur coat must be dried in the open air, but not under direct sunlight. This will help get rid of unpleasant odors and aerate the nap. Also, you can not dry the fur with a hair dryer, on the battery or near any other source of heat.

6. It is not necessary to comb the fur of astrakhan fur, it is enough just to shake it after cleaning and to ventilate.

7. Vinegar or acetone can not be cleaned artificial fur.

8. Do not use aggressive detergents designed to remove rust for cleaning the fur coat.

9. In order for the product to last for more than a dozen years, its care must be comprehensive. It is not enough to monitor the condition of the fur. Leather base is prone to cracks and tears over time. To prevent this from happening, and the skin becomes more elastic, it is necessary to lubricate it with vegetable oil, boiled pork or fish oil.

All of the above methods are effective, but require caution in the application. If the fur product is too polluted, the spots occupy a large area, it is better not to risk it, but still use the services of professionals. An important role in maintaining the beautiful appearance of the product is played by its proper storage. A thing must be placed in a canvas bag, putting there a bag of dried geranium flowers, orange peel to protect the product from moths. Fur must often be aired and combed with a brush.

Care rules

Even if in the warm season you keep the fur coat in a special case, it can still fall on the dust. Do not use a vacuum cleaner to remove dust from a fur coat. It is better to gently pound or shake it.

2-3 times a month, clean the fur with a metal brush for animal fur. The hairs on the fur coat will become fluffy and shiny.

Recommendations for the care of a fur coat:

  • If the fur has adhered, wipe it with a wet sponge to make it wet. Then comb in the direction of growth of the villi. Dry the fur coat on the hanger, and when the fur dries, slightly knock it out.
  • Old fur can be peeled using potato peelings. To do this, wash the remains of potatoes, twist in a meat grinder 2-3 times, until a homogeneous mass. Add liquid ammonia to gruel (1 tsp.), Mix. Apply the mixture to the contaminated area of ​​the fur coat and brush it. After that, wipe with a damp sponge.
  • To restore the softness of the coarsened fur, wipe it with the following solution: in warm water (0.5 l) add petroleum jelly (1 tbsp. L.) And egg yolk. Apply the resulting liquid on the skin of the fur. Mash the product in your hands, pull in different directions. Also for these purposes, you can use glycerin, diluted with water.
  • If the fur core has hardened, moisten it with a solution of vinegar (2 tablespoons of vinegar per 1 liter of water), mash, and slightly stretch the fur coat in different directions. Repeat this procedure 2-3 times. A break between treatments is 2-3 hours. Dry the fur coat in expanded form. Then lubricate it with emulsion (in 1 liter of warm water, add 15-20 drops of ammonia and 100 g of castor oil), and knead again. Next, fold the fur coat to the core, and soak for 3-4 hours. Hang and dry.

Care for different types of fur

Arctic fox. Mix table salt (3 tsp.), Ammonia (1 tsp.) And water (0.5 l.). Moisten a cotton swab in the resulting solution, and wipe contaminated areas with it in the direction of the pile growth.

Mink. Fur mink over time loses shine. To return it, use the following recipe: in boiling water (1 l) add soap (10 g), ammonia (12 drops) and fish or lard oil. Cool the solution to 35 ° C. Apply it to the fur with a brush.

Rabbit. Originally combed the fur. Then moisten a cotton swab in hydrogen peroxide 5% or acetic acid 6%, wipe the pile with it in the direction of growth. Walk through the pile with a damp sponge.

Astrakhan. If the gray astrakhan fur is yellow, wipe it with a hydrogen peroxide solution (for 200 ml of water, 1 tsp. Of peroxide and 5 drops of ammonia).

Otter, mole, beaver. Spread the fur coat on a flat surface, sprinkle with hot dry sand, wipe with a palm. Shake off the dirty sand on the floor. Repeat the procedure until the fur is clean.

Dark fur cleaning

To clean dark fur, get bran, heat them to a temperature of 60-70 ° C. Gently rub the bran into the fur until they collect all the dirt. Then chop the nuts in a coffee grinder or blender, tie the powder in gauze. The resulting swab wipe the pile along the growth line. Walnut oil will give the fur shine.

Light fur cleaning

Spread the fur coat on a flat surface, sprinkle with semolina, potato flour or starch. Gently rub the powder on the product, remember it. Then shake out a fur coat, and comb. If the croup or starch, pouring out of the fur, turned gray, repeat the procedure.

To clean heavily soiled tsigheka or sheepskin, pour the fur over with starch. Dilute washing powder in water until a homogeneous solution is obtained, and spray the product with a spray bottle. Spread your hands on the mass of wool. When the wet starch dries, go for a coat with a brush for animals. Then shake out the product properly and comb it again.

Using simple methods, you can clean the fur coat at home. To do this, you need to choose the right way and means to remove dirt and take a little time to clean.

Safe cleaning of fur - a guarantee of long service

Proper storage can increase the overall life of the coat. However, before sending it to the closet before the first cold weather comes, the fur should be cleaned, dried and then combed to give it a neat and attractive look.

Dry cleaning does not always help to achieve the desired results, moreover, such organizations often use too aggressive cleaning agents, under the influence of which the fur can become fragile, brittle and rare. Such perspectives are not at all encouraging, are they?

Interesting to read

Therefore, in some cases, it will be much better and safer to clean the fur of the fur coat at home, using for this purpose affordable and safe tools at hand that act gently and effectively at the same time. Of course, the processing of fur coats such means will be longer, so you need to be patient - but the result will fully meet all your expectations.

In what cases are required cleaning procedures for fur coats? To understand this, carefully examine the fur. Important signals will serve such moments as:

  • plaque dust
  • the presence of trash in the hairs of fur,
  • vagueness and skatness,
  • dullness and uneven color,
  • a feeling of greasiness,
  • the presence of stains.

If you notice one or more "symptoms", it means that your fur coat needs immediate cleaning.

Choosing a suitable method, do not forget that natural fur is strictly forbidden to wash, iron, and also to dry near the devices radiating heat.

Competently selecting simple and affordable tools for everyone, you can clean your fur coat made from any kind of fur - mink, silver fox, astrakhan fur, rabbit and others at home.

We relieve a fur coat from dust and light pollution

Before you clean a fur coat from natural fur, you need to find out the degree of its contamination. It is very easy to do this at home - just turn on a regular hairdryer and direct the air stream towards the fur.

At the same time, pure fur villi will easily fly apart and return to their place just as easily. But with the stuck together and weighted villi nothing like this happens.

In addition, their appearance is very untidy, which, in turn, indicates that the coat needs immediate assistance.

The most easily eliminated dust. For this you need:

  • gently wrap the fur coat slightly moistened with a sheet (natural cotton fabric,
  • In this form, spread the product on the floor pile down,
  • intensely knock out.

There are other ways to do this. You can, for example, use a special metal brush designed for animal hair. But it is extremely undesirable and risky to use a vacuum cleaner for this, because direct air flows are harmful to the state of the natural fur of mink and other species.

After such a simple cleaning, the fur coat must be placed in a special case - it will protect the product from dust, as well as from the attempt of an insidious moth.

If, in addition to dusty deposits, there are also light contaminations, use lemon juice:

  • mix juice with water in equal proportions,
  • soak in the resulting solution a soft foam sponge,
  • carefully treat each area where there is dirt,
  • dry the coat in the air,
  • carefully comb the fur so that it becomes fluffy and attractive.

In the event that paraffin spots are present on the fur, they can be removed in winter. You should do this:

  • bring fur to the balcony
  • wait until freezing
  • very carefully, using paraffin and thumb to remove paraffin from the villi. This can be done exclusively in the direction from the base to the tips.

This method is suitable for both natural and artificial furs.

Light and dark fur: the secrets of effective cleaning

Before cleaning the fur of the mink fur coat from dirt, it should be borne in mind that different methods are applicable to light and dark colors.

To clean the bright shades of fur at home, you can use the following available tools:

  • talc,
  • flour,
  • potato starch,
  • a piece of chalk,
  • baby powder.

All the listed products have a porous structure, thanks to which they are able to perfectly polish each villus and give an attractive shine to a fur product.

Either of the selected products should be sprinkled evenly on the entire coat, lightly rub into the pile, and then shake off. As a result, the color of talcum powder or starch will turn gray — this indicates significant contamination. The procedure should be repeated several times until the agent used remains white.

Here is another long-known and proven method of cleaning white fur coats:

  • Dissolve a teaspoon of hydrogen peroxide and a few drops of ammonia in a glass of water
  • Pour the prepared product into a convenient spray bottle,
  • evenly spray it all over the fur coat,
  • dry the product by hanging it in the sun (but not longer than one day).

Dark fur requires a completely different approach. To clean it, it is recommended to prepare a solution consisting of equal parts of alcohol and vinegar - they should carefully wipe each contaminated area. This method is suitable for mink and rabbit products. It is possible to remove contamination from coarser types of fur, such as nutria or otter, using heated sand.

Knowing how to clean the fur of a mink fur coat at home, you will provide this product with a flawless appearance and excellent preservation.

How to clean a fur coat at home

For high-quality cleaning, a fur coat should be dry-cleaned. But with minor contamination can cope on their own. It is not difficult, the main thing is to choose the right way.

When to clean

There are signs that "say" that the fur coat needs cleaning:

  • heavily split hair ends,
  • hairs tangled into nodules,
  • debris visible between the hairs
  • the color of the fur coat became uneven,
  • visible dusty pollution.

Care rules

Even if in the warm season you keep the fur coat in a special case, it can still fall on the dust. Do not use a vacuum cleaner to remove dust from a fur coat. It is better to gently pound or shake it.

2-3 times a month, clean the fur with a metal brush for animal fur. The hairs on the fur coat will become fluffy and shiny.

Recommendations for the care of a fur coat:

  • If the fur has adhered, wipe it with a wet sponge to make it wet. Then comb in the direction of growth of the villi. Dry the fur coat on the hanger, and when the fur dries, slightly knock it out.
  • Old fur can be peeled using potato peelings. To do this, wash the remains of potatoes, twist in a meat grinder 2-3 times, until a homogeneous mass. Добавьте в кашицу нашатырный спирт (1 ч. л.), перемешайте. Нанесите полученную смесь на загрязненный участок шубы и почистите его щеткой. После этого протрите влажной губкой.
  • To restore the softness of the coarsened fur, wipe it with the following solution: in warm water (0.5 l) add petroleum jelly (1 tbsp. L.) And egg yolk. Apply the resulting liquid on the skin of the fur. Mash the product in your hands, pull in different directions. Also for these purposes, you can use glycerin, diluted with water.
  • If the fur core has hardened, moisten it with a solution of vinegar (2 tablespoons of vinegar per 1 liter of water), mash, and slightly stretch the fur coat in different directions. Repeat this procedure 2-3 times. A break between treatments is 2-3 hours. Dry the fur coat in expanded form. Then lubricate it with emulsion (in 1 liter of warm water, add 15-20 drops of ammonia and 100 g of castor oil), and knead again. Next, fold the fur coat to the core, and soak for 3-4 hours. Hang and dry.

Care for different types of fur

Arctic fox. Mix table salt (3 tsp.), Ammonia (1 tsp.) And water (0.5 l.). Moisten a cotton swab in the resulting solution, and wipe contaminated areas with it in the direction of the pile growth.

Mink. Fur mink over time loses shine. To return it, use the following recipe: in boiling water (1 l) add soap (10 g), ammonia (12 drops) and fish or lard oil. Cool the solution to 35 ° C. Apply it to the fur with a brush.

Rabbit. Originally combed the fur. Then moisten a cotton swab in hydrogen peroxide 5% or acetic acid 6%, wipe the pile with it in the direction of growth. Walk through the pile with a damp sponge.

Astrakhan. If the gray astrakhan fur is yellow, wipe it with a hydrogen peroxide solution (for 200 ml of water, 1 tsp. Of peroxide and 5 drops of ammonia).

Otter, mole, beaver. Spread the fur coat on a flat surface, sprinkle with hot dry sand, wipe with a palm. Shake off the dirty sand on the floor. Repeat the procedure until the fur is clean.

Dark fur cleaning

To clean dark fur, get bran, heat them to a temperature of 60-70 ° C. Gently rub the bran into the fur until they collect all the dirt. Then chop the nuts in a coffee grinder or blender, tie the powder in gauze. The resulting swab wipe the pile along the growth line. Walnut oil will give the fur shine.

Light fur cleaning

Spread the fur coat on a flat surface, sprinkle with semolina, potato flour or starch. Gently rub the powder on the product, remember it. Then shake out a fur coat, and comb. If the croup or starch, pouring out of the fur, turned gray, repeat the procedure.

To clean heavily soiled tsigheka or sheepskin, pour the fur over with starch. Dilute washing powder in water until a homogeneous solution is obtained, and spray the product with a spray bottle. Spread your hands on the mass of wool. When the wet starch dries, go for a coat with a brush for animals. Then shake out the product properly and comb it again.

Using simple methods, you can clean the fur coat at home. To do this, you need to choose the right way and means to remove dirt and take a little time to clean.

How to clean the fur coats at home

To clean the fur coats at home, you can use only the most gentle and gentle methods, as well as be careful. In the opposite case, there is a risk to spoil an expensive product.

Safe cleaning of fur - a guarantee of long service

Proper storage allows you to increase the overall life of the coat. However, before sending it to the closet before the first cold weather comes, the fur should be cleaned, dried and then combed to give it a neat and attractive look.

Dry cleaning does not always help to achieve the desired results, moreover, such organizations often use too aggressive cleaning agents, under the influence of which the fur can become fragile, brittle and rare. Such perspectives are not at all encouraging, are they?

Interesting to read

Therefore, in some cases, it will be much better and safer to clean the fur of the fur coat at home, using for this purpose affordable and safe tools at hand that act gently and effectively at the same time. Of course, the processing of fur coats such means will be longer, so you need to be patient - but the result will fully meet all your expectations.

In what cases are required cleaning procedures for fur coats? To understand this, carefully examine the fur. Important signals will serve such moments as:

  • plaque dust
  • the presence of trash in the hairs of fur,
  • vagueness and skatness,
  • dullness and uneven color,
  • a feeling of greasiness,
  • the presence of stains.

If you notice one or more "symptoms", it means that your fur coat needs immediate cleaning.

Choosing a suitable method, do not forget that natural fur is strictly forbidden to wash, iron, and also to dry near the devices radiating heat.

Competently selecting simple and affordable tools for everyone, you can clean your fur coat made from any kind of fur - mink, silver fox, astrakhan fur, rabbit and others at home.

We relieve a fur coat from dust and light pollution

Before you clean a fur coat from natural fur, you need to find out the degree of its contamination. It is very easy to do it at home - just turn on a regular hair dryer and send a stream of air to the fur.

At the same time, pure fur villi will easily fly apart and return to their place just as easily. But with the stuck together and weighted villi nothing like this happens.

In addition, their appearance is very untidy, which, in turn, indicates that the coat needs immediate assistance.

The most easily eliminated dust. For this you need:

  • gently wrap the fur coat slightly moistened with a sheet (natural cotton fabric,
  • In this form, spread the product on the floor pile down,
  • intensely knock out.

There are other ways to do this. You can, for example, use a special metal brush designed for animal hair. But it is extremely undesirable and risky to use a vacuum cleaner for this, because direct air flows are harmful to the state of the natural fur of mink and other species.

After such a simple cleaning, the fur coat must be placed in a special case - it will protect the product from dust, as well as from the attempt of an insidious moth.

If, in addition to dusty deposits, there are also light contaminations, use lemon juice:

  • mix juice with water in equal proportions,
  • soak in the resulting solution a soft foam sponge,
  • carefully treat each area where there is dirt,
  • dry the coat in the air,
  • carefully comb the fur so that it becomes fluffy and attractive.

In the event that paraffin spots are present on the fur, they can be removed in winter. You should do this:

  • bring fur to the balcony
  • wait until freezing
  • very carefully, using paraffin and thumb to remove paraffin from the villi. This can be done exclusively in the direction from the base to the tips.

This method is suitable for both natural and artificial furs.

Light and dark fur: the secrets of effective cleaning

Before cleaning the fur of the mink fur coat from dirt, it should be borne in mind that different methods are applicable to light and dark colors.

To clean the bright shades of fur at home, you can use the following available tools:

  • talc,
  • flour,
  • potato starch,
  • a piece of chalk,
  • baby powder.

All the listed products have a porous structure, thanks to which they are able to perfectly polish each villus and give an attractive shine to a fur product.

Either of the selected products should be sprinkled evenly on the entire coat, lightly rub into the pile, and then shake off. As a result, the color of talcum powder or starch will turn gray — this indicates significant contamination. The procedure should be repeated several times until the agent used remains white.

Here is another long-known and proven method of cleaning white fur coats:

  • Dissolve a teaspoon of hydrogen peroxide and a few drops of ammonia in a glass of water
  • Pour the prepared product into a convenient spray bottle,
  • evenly spray it all over the fur coat,
  • dry the product by hanging it in the sun (but not longer than one day).

Dark fur requires a completely different approach. To clean it, it is recommended to prepare a solution consisting of equal parts of alcohol and vinegar - they should carefully wipe each contaminated area. This method is suitable for mink and rabbit products. It is possible to remove contamination from coarser types of fur, such as nutria or otter, using heated sand.

Knowing how to clean the fur of a mink fur coat at home, you will provide this product with a flawless appearance and excellent preservation.

We clean the fur coat at home

When acquiring a status mink coat, we rarely think about the fact that over time it can lose its luxurious look. Despite the fact that the mink is famous for its good wear resistance, it will be able to preserve its presentability for a long time only with careful handling and proper storage. Given the value of a mink coat, it would be a shame to part with it ahead of time due to inept care.

There is no doubt that the mink should be cleaned periodically. The winter season in the city is not the most prosperous in terms of the environment. In addition to precipitation and dust, reagents that prevent icing can be used to harm fur, with which our courtyards and streets abundantly sprinkle.

Dry cleaning: with caution!

It would seem that professional dry cleaning is the perfect way to clean a mink coat. However, fur experts claim that under industrial conditions, fur is treated rather aggressively.

Solvents used in Russia are capable of washing tannins and fat-containing components. In addition, high-tech equipment can boast only a few plants.

Therefore, after 3-4 dry cleaners, the condition of the fur can become unpredictable.

Experts do not advise often to resort to professional cleaning of a mink coat: this should be done only in emergency cases and from proven experts. If you need to refresh the mink after the winter season or remove minor pollution, it can be done at home.

If you only need to clean the fur coat lining, experts advise to replace it with a new one. This simple service is available in any fur shop.

How to understand if a fur coat needs cleaning?

Clean the natural mink should be only in the case of visible pollution. To resort to this procedure after each season is not worth it. Before cleaning for storage, you only need to comb the mink coat with a brush for cats and put them in a fabric cover, not forgetting to provide enough space, lack of heat and moth treatment.

You can clean the fur yourself when:

  • there is dust on the coat
  • faded initial shine
  • the villi are tucked in
  • the fur has lost its pomp, has become salted.

The simplest pollution test can be done at home with a hair dryer. Direct the air stream to the fur coat. If the villi "push" and fly apart, cleaning can be delayed. If the pile sticks together, it's time to get to work.

Another significant feature is pile stiffness. Pure mink coat shines effectively, soft to the touch. If, when stroking, you feel that the pile has become more rigid, it means that it needs refreshing.

We'll tell you more about how to properly clean the product from the mink house.

Dry clean

The dry method is the safest because it does not require the use of water, which can harm natural fur. Unfortunately, it saves only in the case of light dirt with dirt or dust. If you spill red wine or juice on a mink coat, you will not be able to clean it with a gentle method.

Conventional talc is recognized as the best home remedy for dry cleaning of natural fur. Spread the fur coat in a horizontal position, sprinkle with talcum powder and lightly rub it with your hands. Let stand for 10 minutes, then brush the talc with a brush.

Finally, shake the product well. To the naked eye, you can see that the spent talc has become dark. If necessary, you can clean the coat this way again.

In some women's blogs, you can find advice to use instead of talc, cereal or bran. It is not recommended to do this because of the danger of attracting insect pests, including moths, to the “tasty” fur coat. The insects, harmless in appearance, are capable of destroying a valuable thing in one warm season.

Little tricks

The best time to clean the mink - the end of the season socks. If you are not too lazy to do the cleaning at home in the spring, then kill two birds with one stone. Firstly, with the onset of cold weather, update the season in a clean, chic fur coat. Secondly, you will carry out preventive measures against fur pests, the larvae of which are activated during the summer period.

How to clean a mink coat with wet methods

Regardless of which method you choose, remember the basic rule - it is impossible to wet the skin cavity! For the same reason, you need to protect your mink beauty from rain and sleet. If by chance a car on the street gets dirty coat with dirty water from under the wheels, make every effort to clean it immediately.

If wetting still occurred, in any case, do not dry the damp place with a hairdryer or near heating devices. In this case, the mink product can sit down, and the pile can become thin and brittle. In the most unpleasant cases, the “welding” of protein structures of the skin occurs, which under mechanical action can lead to rupture of the skins.

In contrast to the core, the mink fur is not afraid of moisture, so you can clean it in a wet way, following certain rules.

Instructions on how to safely clean the natural fur coat at home:

  • hang a fur coat on broad shoulders,
  • add some shampoo into the water, whip up the cool foam,
  • moisten a sponge in the foam and gently apply it to the pile,
  • With a clean, damp sponge, wipe off foam and dirt residue.
  • brush the mink,
  • dry naturally away from heating devices and sunlight,
  • after the coat dries, brush it again.

During operation, make sure that the water does not fall on the core, process only the nap and undercoat. Along with shampoo for hair, good results were shown by special detergents for wool. Shampoos for animals have a more natural composition, but require compliance with the instructions for breeding.

If the nap is salted and fallen, a weak ammonia solution will help. Dissolve ammonia in water in a ratio of 1: 2. Use a damp sponge to clean the fur coat in the direction of growth of the pile. Then the product should be dried and combed.

The following solution will help remove grease stains and grease:

  • 500 ml of water
  • 40 ml of ammonia,
  • 20 g of salt.

Shake the mixture, wipe the stain area once or several times until the dirt disappears.

Pollution prevention

During the period of socks, once a week, brush the fur coat with a soft brush for cats, being careful not to damage the core. A simple procedure will keep the fur in good condition for a longer period.

Adsorption - the best way to clean the white and blue mink

To clean the mink coat of light shades should be approached with extreme caution, since the wrong actions will make the fur grayed and "miserable". One of the available tools that can provide first aid to contaminated white mink is potato starch. Use it like talcum powder, as described above.

A more effective proven method for white fur products - clean with sawdust.

You can buy them in the usual pet store. Sawdust maple, oak, and other non-resinous trees are best suited for this purpose. Spruce or pine sawdust can ruin the fur due to the high resin content. For a predictable result, follow the instructions below:

  • spread the sawdust and lightly moisten them with alcohol,
  • Spread the sawdust evenly over the surface of the fur coat, press it down a little with your hands until it touches the undercoat,
  • scoop the sawdust and shake the product.

The result will be noticeable immediately - the mink coat will freshen and become fluffy.

Than to clean a light mink of yellowness

The showiness of a snow-white fur coat may fade with time. The appearance of yellowness on the white mink is a natural process, but it can be influenced even at home.

To clean the yellowed mink mixture is used:

  • water - 200 ml
  • peroxide - 5 ml
  • ammonia - 2 drops.

Pour the mixture into a spray bottle, and spray evenly on the fur coat. Then simply dry the product.

If only the collar of a fur coat has turned yellow, it is most likely caused by the impact of decorative cosmetics on it: powders, foundation and other coloring agents.

In such a situation, not natural fading occurs, but pigment staining on the pile. If the tracks are fresh, then you can try to clean them using the above methods.

Old stains from cosmetics to remove at home is unlikely to succeed. We can only recommend to avoid such pollution in the future.

Professional tools

Household chemicals for cleansing fur coats are in demand, despite the rather tangible value. К ней любят обращаться те обладательницы норковых изделий, кто хочет получить быстрый контролируемый результат без лишних усилий.

В основном это аэрозоли-распылители, которые удобно наносятся. В составе, как правило, используются животные жиры и эфирные масла, улучшающие внешний вид пушнины. Выбирая подобную продукцию, советуем учитывать рекомендации по применению. Introducing the TOP-4 best mink cleaning products:

  1. INSAF - effectively cleans the fur, making it soft and elastic. It protects from moisture, prevents stalling, acts as an antistatic agent, scares away moths.
  2. TERRE DE SOMMIERES stain remover powder perfectly removes greasy stains.
  3. ULTRA FINISH MILK - Italian remedy will make your mink coat silky, improve shine without gluing the villi.
  4. BIOFUR is a Russian line of natural cosmetics for the care of products from natural fur. According to the manufacturer, the tool not only allows you to effectively clean the pollution in the form of dust, dirt, food stains, grease, but also restores the living structure of fur.

How can you not clean the mink coat

Oddly enough, on the net you can find tips to wash a fur product in water like clothes made of cloth. It is strictly forbidden to do this not only with respect to fur coats, but also hats, collars and individual skins. Other prohibitions have already been mentioned, summarize them briefly. When cleaning the fur coat can not:

  • dry it near heating appliances, fireplaces, over an open fire, as well as using a hot hair dryer,
  • ironing
  • use aggressive detergents,
  • use peroxide for dark products.

Hostess note

Competently clean the fur product - a delicate exercise, coupled with a certain risk. Therefore, before treating the entire fur coat with any composition, try the selected agent in a small, most inconspicuous area.

How to clean a fur coat at home

In the process of prolonged wear and use of natural fur products, it loses its ideal original appearance. General and local contamination of fur appears.

The fur product, especially a fur coat or a short fur coat, over time, acquires a musty and unpleasant sweaty smell, the luster of the pile disappears.

Consider the recommendations to properly clean the fur coat at home.

What can not be done at home with a fur coat

Absolutely absolutely it is impossible at home to perform the following procedures with fur products:

  • soak the fur in water with detergent and other laundry detergents,
  • wash and rinse fur things, and wash the stains on them under water,
  • to keep fur clothes for drying over an open fire, close to electric heaters, central heating radiators or radiators,
  • a fur coat that was wet under the snow on the street cannot be dried in a draft, a fan or a hairdryer,
  • It is strictly forbidden to iron the fur coat with an iron, after cleaning at home it will even out by itself.

Apply ammonia

Cosmetic cleaning of a natural fur coat at home begins with local impurities. Lay an oilcloth on a flat surface, for example, on a table. Put on her soiled fur coat. We collect half a liter of warm water, dilute one teaspoon of ammonia in it and add one teaspoon of any available detergent. Stir well, but do not shake.

In the resulting solution, we wet the usual sponge, and spend it on heavily polluted areas of fur. It is necessary to let the solution soak for a few minutes. Then, with palms, lightly distribute evenly the remaining composition over the entire surface of the fur coat.

The active ingredients of this solution are well suited for natural fur, as they easily penetrate into the scaly layer of hair at the molecular level and quickly dissolve particles of pollutants. Then rinse the sponge in water, squeeze well and wipe the fur with it. Then wipe the entire surface of the fur with a napkin.

This method will help to clean, even a bright fur coat in hard to reach places.

After cleaning the fur coat, it is necessary to hang it on the hanger, to allow the fur product to dry well at room temperature. Be sure to exclude contact with the fur product of direct sunlight, hot air from radiators or electric heaters.

Make a "scrub" with mustard powder

Fold the fur coat on a flat surface. Liberally sprinkle the fur surface of the fur coat with fresh, dry mustard powder. Then carefully rub the pile with mustard between the palms, as if doing a light “scrub” coat.

After such a dry cleaning of the fur, shake the fur coat well. With the help of a terry towel it is necessary to clean the excess residues of mustard powder with delicate movements on the growth of hairs.

In order to restore the shine of the fur of the fur coat at home, it is necessary to wet the clothes brush with vinegar and lightly brush the pile of the fur product against hair growth, if the fur is short, or in fur growth, in the case of a long nap of the fur coat.

In conclusion, in order to give the fur coat a fluffy look, it is necessary to take a clothes brush or a comb and in the direction of the nap with gentle movements, without damaging the leather fabric, we comb the fur a little. This is a fairly safe and hypoallergenic method of cleaning any fur products at home. This cleaning will take no more than an hour.

Apply gasoline

First, we prepare a weak solution of gasoline in water. Then we wet a clothes brush in it and carry it along the most polluted areas of the fur coat. We leave the fur product with the treated areas to lie down for five minutes so that the gasoline solution is well absorbed. After this time, you need to take a terry towel, soak it in warm water and remove dirt on the surface with it.

Then proceed to the general cleaning of natural fur products. We process the entire surface of the fur coat with a gasoline solution from a spray bottle (sprayer). Spray the solution over the entire surface of the fur coat, and in the dirtiest places, make three sprays in one area.

Fold a natural fur coat treated with a gasoline solution in several layers and leave in that position for fifteen minutes. Again, rinse the terry towel well and remove any dirt from the fur with it.

Complete the procedure by wiping the fur product with a dry terry towel.

Often a light-colored fur coat is spoiled by yellow spots; sawdust pre-impregnated with gasoline can be used to bleach them. Sawdust soaked in gasoline should be spread over the surface of the fur coat and gently rub in the palms. Then you need to comb through the bright pile and carefully shake out any remaining sawdust.

To restore the living structure of the fur, after drying the product, wipe the fur with a cotton wool dipped in acetic acid. After this, the effect of volume and shine of live fur returns.

Use talc, grits, bran, or starch for cleaning

Fur products can also be cleaned at home, using wheat bran or corn meal, semolina, or starch. Lay the fur garment on a flat surface with the pile up.

Sprinkle it with dry bran, talcum powder, semolina, or starch, and begin to rub it into the dirty pile to clean the pile of dirty stains. It is preferable to perform dry cleaning using talc.

Unlike other components, it is most indifferent to the voracious moth.

Then shake the product well until all the flour, bran or starch is poured from it. You can gently knock a fur coat on both sides, patting evenly over the entire fur product. By this method, cleaning of fur things happens almost instantly.

We use medical alcohol

Quick cleaning of fur coats with short fur at home is easily done using ordinary medical alcohol, but requires care and accuracy.

There is a simple solution in the preparation of which you can quickly clean the pollution on the fur coat. It consists of the following components: two teaspoons of medical alcohol, fifty milliliters of warm water, one teaspoon of table vinegar.

Apply this well-mixed solution on a gauze pad and wipe the fur part with it in the direction against the pile growth. We leave the product to dry, while the smell quickly disappears. Then wipe the pile with a dry towel.

Such cleaning is economical, simple, and does not require special skills.

To add shine and to get rid of brittleness fur will help walnut. Put the peeled walnut kernels into gauze, tie them up and crush until the selection of walnut oil. With this oil we wipe a fur coat. Then processed leave it hang on wide shoulders in a well-ventilated room.

Any of the methods described above will surely help to clean the coat of the house with high quality with your own hands, without going to dry cleaning.

Do I need cleaning

First of all, you need to decide whether your fur coat needs cleaning. Of course, if you get it dirty in transport or on the fur splashed out from under the wheels of a car, the need to eliminate pollution is obvious.

If you are thinking about how to clean the fur from the accumulated dust and possible grease, we recommend that you use a regular hair dryer to dry your hair.

Direct the air stream to the fur coat at a distance of at least 40-50 centimeters. If the hairs of the fur fly away freely and easily and form a small open area in the center of the air flow, which disappears as soon as you remove the hair dryer, and the hairs fall back on their original place, then we can conclude that your product does not need cleaning.

In this case, it is better not to injure him and just send it to storage.

If under the air flow the hairs remain motionless or are bundled together, your coat really needs a properly selected cleaning.

Dry clean

First of all it should be noted that there are two types of mink fur cleaning:

It is believed that for mink products dry cleaning is most acceptable and is the most gentle. Unfortunately, this method can eliminate only the simplest pollution, for example, ordinary dirt.

If you want to know how to clean a fur coat from a mink at home, a dry cleaning video will help you get acquainted with the correct sequence of actions.

In order to remove dirt from a fur coat, you only need a brush to take care of fur products with short metal bristles. To start the product must be thoroughly dried without the use of artificial heat sources.

It is enough just to hang a fur coat on the hanger, suitable in size, in a room with room temperature. When the contaminated area is dry, brush it in the direction of hair growth several times, then shake the product.

The brush will remove the dry dirt, and the cleaned fur will shine again.

Perfectly proven method of cleaning mink products using semolina. It is suitable if the product has been worn for a long time and, in general, has lost its original appearance, has become dusty and has lost its luster.

This is especially noticeable on the sleeves, in the area of ​​the gate and pockets. Spread the fur coat on a flat surface and sprinkle the places of contamination with semolina.

Light movements, simulating the process of hand washing, process the necessary areas for 30-45 seconds.

Semolina will be a great abrasive agent that quickly removes contamination from fur. At the end, shake the product and go over it with a special brush, which we wrote about above.

Some recommend starch instead of semolina. If after the described manipulations the starch became darker, it means that the fur was really dirty and the cleaning procedure should be repeated once or several times, until the starch remains white.

Wet cleaning

Wet cleaning implies a more aggressive effect on the fur using a variety of liquid formulations.

One of the most popular methods of mink fur cleaning is brushing with a brush dipped in gasoline. It should be noted that such a manipulation is not recommended with very light fur, otherwise it will turn yellow.

It is necessary to work with a brush easily, without pressing and not trying to completely wet the fur. It is very important to observe the necessary safety precautions, to work indoors with open windows and away from the source of fire.

How to clean a fur coat from a mink at home from yellowness? There are several ways. The most effective - the use of hydrogen peroxide or vinegar.

Take a regular cotton pad and a vial of 5% hydrogen peroxide. Using a disc soaked in a solution, process the fur in the direction of hair growth.

You will see traces of dirt on the disk, and you will also notice how the cleaned fur will shine again and become snow-white. Do not forget to change the cotton pads.

How to clean a mink fur coat at home with vinegar? Very simple. Prepare the vinegar solution (no more than 5%) and proceed in accordance with the recommendations applicable for hydrogen peroxide cleaning.

The most important thing is not to overdo it and not wet the base of the fur. Handle the product without pressure, press the cotton pad after soaking in the solution.

You can spray the starch solution on the fur surface with a spray bottle and allow it to dry. After that, remove the coating with a special brush for the care of fur products.

If you are still in doubt about whether to clean the natural fur yourself and how to clean the mink fur coat at home, the reviews will help you choose the best method of cleaning.

Natalya: “A friend recommended a very gentle way of cleaning mink fur with wheat bran to me. They must be dried in the oven on a baking sheet, and then spread out on a fur coat and try to rub the bran slightly against the direction of hair growth. What I like about this method is that it’s almost impossible to spoil a fur coat. Dry bran to the fur will definitely not hurt. ”

Marina: “I don’t clean my fur coat with starch liquid solution - it’s not so easy to completely remove it from the fur, it clogs in and swells if snow gets onto the fur. I prefer dry starch: it seems to me that there is simply no better way to care for a white mink coat. ”

Elena: “I have a chocolate-colored mink coat. I have been wearing it for several years and for cleaning at the end of each season I use a solution of ammonia. I mix 4 parts of water and one part of liquid ammonia and process the fur coat in the direction of hair growth with a cotton swab. I give the coat to dry and pack ”.

At the end of the article we want to draw your attention to some taboos that exist in the care of mink fur:

  • Wash fur using water and detergent is strictly prohibited. Such cleaning will cause irreversible consequences, the product will not be able to return to its former appearance.
  • Drying in the immediate vicinity of the source of artificial heat. These sources should include batteries, and heaters, and even a hair dryer for hair styling. If you are exposed to snow or rain, dry your mink coat on your hanger in a room with room temperature.
  • Impact on fur with iron. Iron can not smooth the creases on the fur, and this applies to ironing from the lining. If you kept the fur coat folded (which is not recommended), hang it on the hangers and let the fur finish without any forced action on your part.

Using our tips, you can extend the life of your mink product, keep it in its original form and enjoy the beautiful and warm fur in the winter cold.

How to safely clean the fur at home. Simple tools and tips on how to easily clean the fur at home

After a long winter with the onset of heat, fur coats, fur hats, vests and boots are permanently placed in the closet.

In order to prolong the service life of the products, it is necessary to store them properly, and to store them in good order, clean, dry and comb them before storage.

To get rid of dirt your favorite fur coat or fur collar, it is not necessary to take the product to dry cleaning where it can be spoiled.

Yes, and dry cleaning is not always taken for cleaning natural fur, and if taken, for a lot of money.

In addition, chemicals contain aggressive components and significantly reduce the life of the thing. It is much better to be patient and very inexpensive with improvised means, so that without any special efforts to clean the fur products qualitatively, without leaving your home.

Dust deposits, loss of brightness or uniformity of color, debris in hairs, stains of different origin, tangles, confusion and hairiness are evidence of contamination of fur. But how to clean the fur at home, if it can not be washed, dried near heat sources and ironed? In fact, everything is very simple - the main thing is to choose the right ingredients.

How to understand that the fur is dirty

Spots and yellowness can be seen immediately. Determine the degree of general contamination of things and find the most greasy areas will help test with a hairdryer.

Hang the fur coat on the hanger and send cold air from the dryer to it. Do villi fly freely, and then easily fall into place? The fur is clean. If not, you need to clean.

But first remember that in no case can you do with fur products.

Taboo when cleaning fur

  1. Fur can not be washed! If the core (the skin that holds the fur) gets wet, it can become rough and cracked. In this case, the product is deformed and bald.
  2. Fur can not be dried with a hair dryer, on the battery or in direct sunlight! Can only be outdoors or in a well-ventilated area.
  3. Fur can not be ironed! Even from the inside.
  4. Мех нельзя чистить бытовой химией для удаления ржавчины, стиральными порошками с энзимами, отбеливателями.

Перед тем как применить любое другое средство, протестируйте его на небольшом незаметном участке изделия. Например, под мышками.

Как избавиться от пыли

Даже в хорошо закрытом чехле шуба или жилет может запылиться. Поэтому, прежде чем убрать меховую вещь на хранение, а также перед ноской, освежите её.

Spread a damp, white cotton sheet on the floor. Put a fur coat on top and knock it out well first with one and then with the other side. After that, hang it on the shoulders and comb.

If the fur is tangled and felted, spray the thing with warm water from a spray bottle and let it dry. Then comb it. Pile will fall into place. For the same purpose, you can gently walk on the fur with a steamer.

How to get rid of yellowness

Over time, light fur, as well as fur with white on the tips of the pile (silver fox, chinchilla, and others) takes on a yellow tint. The product immediately loses presentable.

There are several ways to clean the fur from yellowness.

  1. In a glass of warm water, dissolve 1 tablespoon of salt and ½ tablespoon of liquid ammonia. Apply the solution with a well wrung soft cloth. Dry and comb.
  2. In a glass of warm water, dissolve 1 tablespoon of hydrogen peroxide. Apply the solution to the product, let it dry, comb it.
  3. In a glass of warm water, dissolve 1 tablespoon of pet shampoo. Beat the foam and, using a sponge, apply it to the nap. After 5 minutes, remove the foam with a sponge or rag soaked in clean water. Dry and comb.

Products with a short nap can be wiped both on and against wool. For long fur, cleaners are applied according to its height, after the pile it can be ruffled.

When removing greasy deposits and stains, the color of natural fur is also important.

How to clean dark fur

To combat pollution on dark fur, the same method is used, but other absorbents.

  1. Rye bran. Suitable for coarse fur (nutria, goat, wolf).
  2. Sawdust. Ideal for muskrat and otter fur. But in no case can not use sawdust coniferous wood: they contain resin.
  3. Sand. It copes well with dirt on the fur of the mole and beaver.

How to remove stains from fur

Spots on fur clothing may have a different nature and origin. For example, natural suede bags willingly give color to fur, if worn on the shoulder. You can get dirty with the sauce when you eat on the run, or put a blot with a clerical pen.

Remove the stain from the dark fur using gasoline (white will turn yellow). Refined gasoline with a high octane rating. Sometimes it is applied in pure form, but more often it is mixed with starch or with laundry detergent without enzymes to the consistency of sour cream. A couple of minutes after application, the mixture should be removed with a sponge dipped in clean water, and the product should be dried and combed.

Stains from light-colored fur can be removed with acetone or alcohol, as well as mixing liquids with starch or baking soda.

The stronger the dye and the older the stain, the harder it is to cope with it at home. If these methods did not work, do not experiment: take the fur coat to dry cleaning.

How to care for mezdra

If you notice that the leather base of the fur product has hardened, do the following procedure.

Dissolve some glycerin or vaseline with egg yolk in a liter of warm water. The resulting mixture, wipe the product from the inside. Slightly remember and stretch the core. Then remove the rest of the mixture and put the item to dry out the inside out.

How to clean faux fur

With products made of artificial fur, everything is simpler and more complicated at the same time.

Easier because they can be washed. It is desirable manually, but it is possible and in the machine at the delicate mode (up to 40 degrees, up to 600 turns) with the use of gentle powders and without spinning.

It is more difficult, because it is difficult to guess with the means for mechanical cleaning.

Vinegar and acetone should not be used to clean faux fur.

Otherwise, you can use all the same methods as for natural fur.

Do you know other life hacks to care for natural and artificial fur? Share them in the comments.

Principles of cleaning

Spots and yellowness appear visually, but other types of pollution can be determined by the flow of cold air from the dryer. If the fur is clean, the villi will scatter, and then easily return to their place. Glare, deformed areas, pil, dirt, other stains - such zones should be noted and cleaned.

Fur can not be washed to avoid deformation and baldness. Also prohibited:

  1. Dry hair dryer.
  2. Place the product near the heating devices.
  3. Dry under UV light.
  4. Only outdoors, in a boiling room.
  5. In winter - at room temperature, away from the battery.
  6. It is a taboo on ironing, even from the wrong side.
  7. It is not recommended to use aggressive household chemicals and bleach containing chlorine.

Mechanical cleaning methods are aimed at removing lumps, hair nodules, dust, dirt. At home, such abrasive materials are used, such as starch, semolina, chalk, talc, sand, which are used for grinding, polishing a delicate thing.

Chemical technologies dissolve grease, paint, outdated contamination. Their action is aimed at restoring the silkiness of the pile, increasing the elasticity of the skin base.

Fur products can be cleaned at home, but you need to be careful not to damage the material. Experts recommend sticking to proven methods, ensuring a favorable outcome of this procedure.

Effective methods:

  • To restore the softness of the seamy side of the fur, the material is soaked with a solution of acetic essence, salt, water (1: 0.5: 1), then gently stretch the skin cavity in different directions.
  • If the fur has gone astray, has lost its luster, then you can return it to its original shape with the help of vinegar - gently wipe the product with a cloth moistened with the composition, without affecting the pile base.
  • Leather jacket with fur upholstery is shown lubricated with glycerin water, you can use a cosmetic body care product, so the base of the collar does not harden, and the product will be silky.
  • If, when drying near the heaters, the fur coat hardened, you need to treat it with alcohol or vodka diluted with water.
  • To soften the rough spots, use vinegar essence, salt and water (2: 3: 1), put in a warm form until completely dry.
  • After the fur is smoothed with a hand over hair growth, which will give a fluffy neat look to the product, it is strictly forbidden to iron the fur items with an iron, even on the inside.

When drying, the fur coat should be hung on wide hangers, which will allow the material not to deform. Hem, cuff sleeves, collar clean regularly. Wiping the gate to prevent wearing a silk scarf, and the bottom of the sleeves - special couplings.

Fur items before cleaning to arrange on the table, ironing board or spread out on the floor.

Several storage rules:

  • Before packing the fur coat to dry it in the fresh air, gently knock it out.
  • Place in a closet without exposure to sunlight and moisture.
  • Suitcases or storage boxes are not suitable for this purpose.
  • For transportation, the fur coat must be placed in a ventilated paper bag or plastic bag.
  • Sleeve fur stuff stuffed with cloth or paper.
  • For a white fur coat to pick up a cover of blue material, thus, it will not lose the white color.
  • To protect the fur product from moths - attach it on the shelf of the cabinet of citrus peel, geranium inflorescences.

White fur things

Light fur is quickly polluted, losing its neatness and attractiveness. To clean it you need to choose cleaning products that do not cause the appearance of yellowness. Be sure to check the composition from the inside of a fur product.

Proven methods:

  • For bleaching, sawdust of hard rock with purified gasoline is used - soak the wood with toxic composition, sprinkle it on the surface of the fur coat, after a few minutes wipe out the remains, comb through the pile with a comb.
  • To eliminate the gray plaque on the fur hood, a mixture of hydrogen peroxide and alcohol is effective; wipe the villi with a moistened cotton napkin and dry it.
  • Shampoo up the shampoo for bathing animals to a state of foam, put things on the surface, remove the remnants with a sponge, and dry them in a natural way.

  • To remove stains from dirt and dust using boiled skin of potatoes. Fur lining shoes treated with petroleum jelly, mixed with yolk, which will give a soft nap.
  • Greasy traces are cleaned with dishwashing gel. Leave the composition on a nap, after 5–10 minutes, remove the rest of the mixture with a damp cloth. All stains are recommended to be removed in a timely manner, in order to avoid deformation of the product.

Yellowness removal

Yellow spots appear on fur things due to improper storage, the influence of environmental factors - solar radiation, perfumes, essential oils, perspiration, accumulation of dust.

Eliminate the yellow tint on the white fur product can be such means:

  1. Dissolve a spoonful of coarse salt in water, half a spoon of ammonia, apply the solution with a wrung cloth, dry and straighten the pile with your hands.
  2. Wipe the wool with a cotton swab dipped in hydrogen peroxide.
  3. Shampoo for animals should be diluted with water, hammered into a state of foam, put on a fur product, after a few minutes remove the remains with a foam sponge.

Means for cleaning of fur are recommended to be applied on pile growth. After cleaning, flatten it with your hands or comb it with a special brush.

Only regular high-quality cleaning of fur products will allow to keep things beautiful, shiny and attractive. It is important to act carefully so as not to spoil the pile!

Pin
Send
Share
Send
Send

lehighvalleylittleones-com